42L

42L

The large rotor and neodymium magnets of the 42L provide up to 131 mNm of holding torque and is optimal for high torque applications. The 48 steps per revolution results in a 7.5 degree step which increases the positional resolution. Motor Highlights - Operating voltage 5V or 12 V - Excellent open loop control - no encoder necessary - Digitally controlled - easy to use with a micro processor - Cost effective - compact design, lower integration cost - Available with both unipolar and bipolar winding

Details

Feature Unit Value
Diameter mm 42
Absolute accuracy 2 ph. On, Full step mode % ± 0.5
Bearing Type Sintered Bronze Sleeve
Detent Torque, Max mNm 29,7
Dielectric Withstanding Voltage VAC 650 for 2 seconds
Holding Torque, MIN mNm 131
Inductance per Phase, typ mH 4,2
Leadwire AWG 26, UL 1430
Maximum Coil Temperature °C 130
Operating Voltage (VDC) V 5
Rated Current per Phase A 0,96
Step Angle degree 7,5
Steps per Revolution 48
Ambient working temperature range °C -20 to +70
Insulation Resistance at 500 VDC 100
Rotor Inertia gcm2 19,5
mass (g) g 116,4
Feature Unit Value
Diameter mm 42
Absolute accuracy 2 ph. On, Full step mode % ± 0.5
Bearing Type Sintered Bronze Sleeve
Detent Torque, Max mNm 29,7
Dielectric Withstanding Voltage VAC 650 for 2 seconds
Holding Torque, MIN mNm 106
Inductance per Phase, typ mH 2,1
Leadwire AWG 26, UL 1430
Maximum Coil Temperature °C 130
Operating Voltage (VDC) V 5
Rated Current per Phase A 0,96
Step Angle degree 7,5
Steps per Revolution 48
Ambient working temperature range °C -20 to +70
Insulation Resistance at 500 VDC 100
Rotor Inertia gcm2 19,5
mass (g) g 116,4

This product is available on the E-SHOP Visit to our e-shop

Feature Unit Value
Diameter mm 42
Absolute accuracy 2 ph. On, Full step mode % ± 0.5
Bearing Type Sintered Bronze Sleeve
Detent Torque, Max mNm 29,7
Dielectric Withstanding Voltage VAC 650 for 2 seconds
Holding Torque, MIN mNm 131
Inductance per Phase, typ mH 22,3
Leadwire AWG 26, UL 1430
Maximum Coil Temperature °C 130
Operating Voltage (VDC) V 12
Rated Current per Phase A 0,4
Step Angle degree 7,5
Steps per Revolution 48
Ambient working temperature range °C -20 to +70
Insulation Resistance at 500 VDC 100
Rotor Inertia gcm2 19,5
mass (g) g 116,4
Feature Unit Value
Diameter mm 42
Absolute accuracy 2 ph. On, Full step mode % ± 0.5
Bearing Type Sintered Bronze Sleeve
Detent Torque, Max mNm 29,7
Dielectric Withstanding Voltage VAC 650 for 2 seconds
Holding Torque, MIN mNm 106
Inductance per Phase, typ mH 11,3
Leadwire AWG 26, UL 1430
Maximum Coil Temperature °C 130
Operating Voltage (VDC) V 12
Rated Current per Phase A 0,4
Step Angle degree 7,5
Steps per Revolution 48
Ambient working temperature range °C -20 to +70
Insulation Resistance at 500 VDC 100
Rotor Inertia gcm2 19,5
mass (g) g 116,4

Partners