Hybrid Stepper Motors

Hybrid stepper motors are a high precision positioning motion system. Their high power at relatively low speeds, and their ability work in full, half or micro step mean that a large majority of application problems can be solved by utilising this technology. The hybrid motor technology can be considered as an optimal solution for a wide variety of applications today, with the absence of mechanical commutation and the use of high quality bearings enables these products to be considered where extended lifetime and or high loads (axial / radial) are needed or exist. Available in 2 or 3 phases with sizes from NEMA 8 to NEMA 42 (20mm to 110 mm square) and step angles of 0.9°, 1.8° and 3.6°. These hybrid products can achieve holding torques of between 1.6 mNm to 30 Nm as well as providing a high level of flexibility in terms of; - Output shaft modifications- Hollow etc... - Wiring looms, cabling and connectors - Addition of pulleys, feedback devices etc.. - Customised windings - High axial / radial load capability. - IP 65 rating (available upon request). Certain versions are of a unique flat design that allow their use in space confined applications.
Model Size (mm) Nema Rated Voltage (V) Dielectric strength for one minute (V) Rated Current per Phase (A)
AP8918L9504
Nanotec
86 34 na na 9.5 VIEW
AP8918L9504-E
Nanotec
86 34 na na 9.5 VIEW
AP8918M6404
Nanotec
86 34 na na 6.4 VIEW
AP8918M6404-E
Nanotec
86 34 na na 6.4 VIEW
AS2818L0604
Nanotec
28 11 na na 0.67 VIEW
AS2818S0604
Nanotec
28 11 na na 0.67 VIEW
AS4118L1804
Nanotec
42 17 na na 1.8 VIEW
AS4118L1804-E
Nanotec
42 17 na na 1.8 VIEW
AS4118L1804-EB
Nanotec
42 17 na na 1.8 VIEW
AS5918L4204
Nanotec
56 23 na na 4.2 VIEW
AS5918L4204-E
Nanotec
56 23 na na 4.2 VIEW
AS5918L4204-EB
Nanotec
56 23 na na 4.2 VIEW
AS5918M2804
Nanotec
56 23 na na 2.83 VIEW
AS5918M2804-E
Nanotec
56 23 na na 2.83 VIEW
AS5918S2804
Nanotec
56 23 na na 2.83 VIEW
AS5918S2804-E
Nanotec
56 23 na na 2.83 VIEW