You choseAdd or modify filters Remove filters
NEW, OFFERS, STOCK PROGRAM
HOLDING TORQUE, NOMINAL CURRENT
Hybrid Stepper Motors
Hybrid stepper motors are a high precision positioning motion system. Their high power at relatively low speeds, and their ability work in full, half or micro step mean that a large majority of application problems can be solved by utilising this technology. The hybrid motor technology can be considered as an optimal solution for a wide variety of applications today, with the absence of mechanical commutation and the use of high quality bearings enables these products to be considered where extended lifetime and or high loads (axial / radial) are needed or exist. Available in 2 or 3 phases with sizes from NEMA 8 to NEMA 42 (20mm to 110 mm square) and step angles of 0.9°, 1.8° and 3.6°. These hybrid products can achieve holding torques of between 1.6 mNm to 30 Nm as well as providing a high level of flexibility in terms of; - Output shaft modifications- Hollow etc... - Wiring looms, cabling and connectors - Addition of pulleys, feedback devices etc.. - Customised windings - High axial / radial load capability. - IP 65 rating (available upon request). Certain versions are of a unique flat design that allow their use in space confined applications.
|Model||Size (mm)||Nema||Rated Voltage (V)||Dielectric strength for one minute (V)||Rated Current per Phase (A)|